World Oil webcasts and webinars are in-depth presentations on oil and gas applications, trends and technology. Moderated by a World Oil editor and including technical experts, these events are focused on providing qualified engineers and professionals in the upstream oil and gas industry with the latest information pertaining to offshore and onshore exploring, drilling, completions and production.

CCUS: Best Practices for Well Construction and Design

October 20, 2022
Sponsored by: Corrosion Resistant Alloys, Gulf Coast CO2, Schlumberger
During this 60-minutes webcast, we will discuss the following: 1) “CCUS: Well Design & Technical Challenges”, presented by Tommy Najar, Vice President, Commercial from Corrosion Resistant Alloys. 2) “CCUS Wellbore Construction and Design”, presented by Lindsay C. Longman Sr., P.E., Drilling Engineer from Gulf Coast CO2 Engineering. 3) “Common Issues surrounding CCS Well Construction”, presented by Dan Morrell, Drilling Consultant from Schlumberger.

Ways to Increase ESG through new Flaring and Fracturing Technology

October 13, 2022
Sponsored by: SICK, Catalyst Energy Services and GD Energy Products
During this 60-minutes workshop, we will discuss the following: 1) "Everything You Need to Know about Flaring in 2022", presented by TJ McIntrye, Upstream Account Director and Irvin Schwartzenburg, Applications Engineer for Flow Products from SICK. 2) "Eco-Conscious Hydraulic Fracturing Has Arrived", presented by Seth Moore, Co-founder, Executive Vice President & Chief Operating Officer from Catalyst Energy Services and Tony McLain, Vice President of Sales from GD Energy Products.

Leveraging Oil & Gas expertise to enhance geothermal projects worldwide

October 06, 2022
Sponsored by: Vallourec
Geothermal operators are facing several technical challenges that need to be tackled to ensure that geothermal wells are reliable on the long-run and optimized in terms of heat supply efficiency. The premium solutions (material, grades and services) that have been used for decades in Oil & Gas activities show promising results in enhancing geothermal wells’ reliability and performance. However, specific evaluations need to be performed to guarantee their compatibility. In this webcast, Maximilien De Maisonneuve and François Penven, in charge of the Geothermal division at Vallourec, will introduce how available technologies at Vallourec can help geothermal operators meet challenging scenarios as well as to ensure their projects’ cost effectiveness. These solutions will be illustrated by some real business cases. Finally, the speakers will also shed some light on what the future of tubular solutions could look like for the next generation of geothermal wells.

Automate your frac pad with TechnipFMC’s iComplete™ CyberFrac™

September 29, 2022
Sponsored by: TechnipFMC
TechnipFMC’s iComplete™ CyberFrac™ system is a fully digital and automated platform for controlling equipment operations during hydraulic fracturing through app-based configurability. In this webcast, John Eden will explain how this system enables well site managers and their teams to follow approved procedures and establish sitewide operational awareness through the Digital Handshake™ while reducing manual errors. John will also be joined by Tara West and Kelly McFadgen from Marathon Oil Corporation to offer customer testimonial to how CyberFrac has provided versatility and flexibility to their frac pads and the improvement they have seen firsthand after implementing the system within their Bakken asset.

Increase Solids and Fluid Handling Capacity, Drilling Fluid Recovery, and Waste Reduction to the Max

September 22, 2022
Sponsored by: Schlumberger
The biggest challenge operators are facing today is the bottleneck at the shakers, the ability to drill faster and the shakers’ ability to keep up with the drill rates, also for those shakers to retain as much of the expensive drilling fluid as possible while keeping those fluids out of the waste stream. The MONGOOSE Max high-capacity shaker is the latest advancement in shakers, significantly increasing solids and fluid handling capacity by 35%, and fluid recovery by 40%. With the integration of the new vacuum technology, the overall oil on cuttings by weight average is 10% over the more than 18% with third-party shakers. The whole mud on cuttings is reduced by up to 40%, with the discarded solids passing 99% of the US EPA Paint Filter Liquids Test 9095B and lowering the solids waste stream by 25%.
Connect with World Oil
Connect with World Oil, the upstream industry's most trusted source of forecast data, industry trends, and insights into operational and technological advances.