Renewable Lubricants introduce safe, eco-friendly lubricants for oil and gas industry

World Oil Staff January 25, 2023

(WO) – Renewable Lubricants introduced Bio-E.P™ Wire Rope Lubricants, ultimately biodegradable vegetable oils formulated with antiwear, extreme pressure (E.P.), anti-rust, oxidation inhibitors and a tackifier. 

They provide a light waxy-tacky coating and are recommended for lubricating multi-strand cables and wire rope wound around central cores of steel or fiber which are subject to heavy loading and or shock loading, like marine cables, crane cables, pulleys, and more. 

These biobased products provide improved fire resistance over equal viscosity petroleum products. They and contain no chlorine, zinc, or heavy metals, so they are safer for employees and the environment.  Performance is enhanced with the Stabilized HOBS’s natural vegetable oil composition, which provides an oily boundary film with a natural polarity to metal surfaces. 

This helps to clean and then penetrates deep into the inner core of the cable to prevent rust and wear.  The super high viscosity index of the stabilized HOBS adds additional lubrication qualities.  Laboratory and field tests have shown that the products provide exceptional protection with excellent low temperature pumpability. 

Bio E.P. application

While it can be applied without heating, warming to 30° to 40°C (86° to 104°F) prior to use allows faster penetration into strands. Ideal for protecting steel cables, pulleys, sliding surfaces, threads, steel chains, slideways, and hinge pins against corrosion galling, and seizure, it is available in 1- and 5-gallon pails, drums, totes and in bulk from the Hartville, OH factory.

Bio-E.P. can be applied by spray, brush, drip, or pressure boot, making it easier and cleaner to apply than traditional petroleum-based products.  This water-displacing, corrosion-inhibiting waxy film is especially effective in protecting ferrous metals in salt and acid fume (hydrochloric acid) environments and against high humidity.

Bio E.P. safety standards

Bio-E.P. ™ Gear Oils meet the Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for Environmentally Acceptable Lubricants (EALs). The oils should be used where low toxicity, biodegradability, and non-bioaccumulation properties are required. 

In addition to being safer for the environment, they are safer for employees.  It exceeds the acute toxicity (LC-50/EC-50{1000 ppm) criteria adopted by the US Fish and Wildlife Service and the US EPA.


Connect with World Oil
Connect with World Oil, the upstream industry's most trusted source of forecast data, industry trends, and insights into operational and technological advances.